• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertise
  • Subscribe

Wire and Cable Tips

  • Basics of Wire and Cable
  • Industry News & Events
  • Blog
  • Markets
    • Automation
    • Construction/Off-Highway
    • Electronics
    • Food/Beverage
    • Medical/Pharmaceutical
    • Military/Aerospace
    • Offshore/Marine
    • Oil/Gas
    • Renewables/Energy Production
    • Robotics
    • Semiconductor
  • Products
    • Data Transmission
    • Networking
    • Power Transmission
  • Suppliers
  • Video
  • DesignFast

Electronics

RJ-45 housing keeps extended connection clean and dry

January 26, 2022 By Redding Traiger Leave a Comment

Platinum Tools announces the launch of the new weatherproof RJ45 coupler housing (p/n 744). Additional features of the new weatherproof RJ45 coupler housing include: IP64 rated – sealed against dust and splashing water; Cat 5e/6/6A compatible with appropriate coupler; Full rubber liner and dual locking latches; Center mounting points to secure to a surface; Now […]

Filed Under: Cable management, Couplers, Electronics Tagged With: platinumtools

BNC cable assemblies use highly flexible, low-loss RF cables

July 28, 2021 By Redding Traiger Leave a Comment

Amphenol RF is offering a full line of high-performance BNC cable assemblies which utilize highly flexible, low loss Times LMR-UF cables. These 50-ohm assemblies are available in multiple configurations in an extensive range of standard lengths from 12 inches to 30 meters and are suitable for a number of applications including test and measurement and […]

Filed Under: Cable assemblies, Electronics, Industrial, RF cable Tagged With: AmphenolRF

Splittable frames for quick and tool-free cable entriese

July 21, 2021 By Redding Traiger Leave a Comment

icotek offers the tried and tested KEL-SNAP frame now as a new splittable version of KEL-SNAP-S. The patented KEL-SNAP-S frames provide a quick and tool-free assembly for the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry frames from icotek. Switch cabinets can be equipped with the KEL-SNAP frame in advance by the control manufacturer […]

Filed Under: Cable management, DW sync, Electronics, Frames, Products Tagged With: icotek

High-frequency 12G MCX cable assemblies FOR 4K/Ultra-HD

June 21, 2021 By Redding Traiger Leave a Comment

Amphenol RF announces the expansion of our 12G MCX product series to include cable assemblies designed on Belden 4855R. This 75-ohm assembly is available in a right-angle plug to right-angle plug configuration in a wide range of standard lengths from six inches to three meters. 12G MCX cable assemblies are suitable for a number of […]

Filed Under: Cable assemblies, Electronics, Products Tagged With: AmphenolRF

HEAD Quabbin 600-V control cable from AutomationDirect

June 11, 2021 By Redding Traiger Leave a Comment

AutomationDirect has added Quabbin 600V control cable to our extensive selection of cable offerings. These cables are ideal for use in control panels, conduits, and where superior electrical properties are required. The smaller diameter design for this cable reduces cost and the space required inside panels and conduits. This cable is available in shielded and […]

Filed Under: control cables, DW sync, Electronics Tagged With: AutomationDirect

IP67-rated USB type-A cable assemblies designed for IoT applications

June 3, 2021 By Redding Traiger Leave a Comment

Stewart Connector announces a new line of IP67 rated USB Type-A Cable Assemblies. Designed for use in IoT applications where reliability and functionality are necessary and USB connections are needed outside of typical office applications, these cable assemblies can be used in multiple applications, including industrial automation, medical devices, military applications, and other harsh environments. […]

Filed Under: Electronics, IoT, Medical/Pharmaceutical, Military/Aerospace, Products Tagged With: stewartconnector

A conversation about Silicon Line and its AOC IC and module technologies

May 24, 2019 By Mary Gannon Leave a Comment

Silicon Line integrated-circuits for active optical cablesSilicon Line integrated circuits for active optical cables

Silicon Line evolved from an analog IC design house to a provider of innovative ultra-low power optical link technology which enables thin, light and long high-speed cables for mobile and consumer electronics markets. The company now has a wide portfolio of physical layer ICs plus associated SerDes ICs for multi-gigabit optical links and holds multiple […]

Filed Under: active optical cables, DW sync, EE sync, Electronics, Markets

Integrated circuits for active optical cables have 72 Gbps bandwidth

May 6, 2019 By Mary Gannon Leave a Comment

Silicon Line integrated-circuits for active optical cablesSilicon Line integrated circuits for active optical cables

Coming off its strongest and most successful year to date, Silicon Line GmbH, has introduced a new line of integrated circuits (ICs) with transmission speeds of 16 to 18 Gbps. The new chips will be produced in single-channel and four-channel versions, enabling the production of active optical cables with speeds up 72 Gbps. Likely applications […]

Filed Under: Data Transmission, EE sync, Electronics, Markets, Products Tagged With: siliconline

USB 3.0 cable assemblies rated for 10,000 flex cycles

November 22, 2017 By Paige Beach Leave a Comment

L-com Global Connectivity announced today that it has introduced a new series of high-flex USB 3.0 cable assemblies for use with PC peripheral interconnects, data acquisition, test and measurement and portable data storage applications. These new USB 3.0 high-flex cables are rated for 10,000 flex cycles, making them ideal for applications where standard USB 3.0 […]

Filed Under: Electronics, Industry News & Events Tagged With: lcom

W.L. Gore introduces new Phaseflex microwave/RF test assemblies

June 7, 2017 By Mary Gannon Leave a Comment

GORE+PHASEFLEX+Test+Assemblies+Type+0N-hi-res

W. L. Gore & Associates (Gore) has introduced the new Gore PhaseFlex microwave/RF test assemblies, type 0N for high density test/interconnection—a lightweight assembly that ensures consistent, repeatable measurements with stable electrical performance up to 50 GHz. High-density and modular test instruments for wireless devices and aerospace systems have become increasingly complex, with a larger number of […]

Filed Under: EE sync, Electronics, Markets, Products Tagged With: gore, wlgore

  • Page 1
  • Page 2
  • Page 3
  • Go to Next Page »

Primary Sidebar

EE ENGINEERING TRAINING DAYS

engineering

LEARNING CENTER

Design World Learning Center
“bills

RSS Current EDABoard.com discussions

  • Voltage Regulator Sizing Question
  • GanFet power switch starts burning after 20 sec
  • Disappearing clock
  • Looking for spice model for Innoswitch3-EP
  • AC amplifier, transistor with bias network

RSS Current Electro-Tech-Online.com Discussions

  • Can I use this charger in every country?
  • using a RTC in SF basic
  • An Update On Tarrifs
  • LCD1602 via I2CBus with PCF8574 (Oshonsoft Basic).
  • Is a gel layer to mitigate finger impact on a touch screen possible?
“wire
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for EE professionals.

Footer

Design World Network

  • Design World Online
  • The Robot Report
  • Coupling Tips
  • Motion Control Tips
  • Linear Motion Tips
  • Fastener Engineering
  • Bearing Tips

Wire and Cable Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About Us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy