Insulation type MTW machine tool wire is now available in 22-gauge from AutomationDirect. Existing MTW wire sizes are 20 AWG to 10 AWG. The 22 AWG wire offers an 8% smaller diameter with a 3 A 600-V rating which is needed for many types of terminal block connections that cannot accept larger wire. MTW wire […]
AutomationDirect
High flex continuous flexing control cable available from AutomationDirect
igus CF9 and CF10 series multi-conductor control cables for continuous flexing applications are available through AutomationDirect in sizes from 20 to 14 AWG, with three to seven unshielded (CF9 series) or four and five shielded (CF10 series) conductors. A green-yellow insulated ground conductor is included in the conductor count of each cable. Individual conductors are […]
Cat5e Industrial Ethernet Cable from AutomationDirect
Quabbin DataMax Extreme Industrial Ethernet cable jackets were developed to survive the many industrial hazards that commercial jackets will not. Quabbin Cat5e Industrial Ethernet cable has a UL PLTC rating allowing it to be installed in a cable tray without the need for conduit. With its 22 AWG conductors it works well in power over […]
Vinyl nylon tray cable from AutomationDirect
VNTC (Vinyl Nylon Tray Cable) 600-V Type TC-ER control cables from AutomationDirect are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. VNTC cable is available in 18 to 10 AWG with 3 to 24 unshielded copper conductors. Cables are cut to length […]
Thermocouple extension wire and cable for multiple sensor connection
Extension cable for both Type K and Type J thermocouples is available with either an overall shield (OS) or with individually shielded pairs with an overall shield (SPOS). These cables allow the connection of multiple field sensors to operating instrumentation or PLC input cards with one run versus having to install multiple extension wires. The […]
Control cabinet cable entry systems simplify installation
The KDL/D cable entry system from AutomationDirect allows cables to be installed through enclosures or other bulkhead surfaces, with the added benefit that pre-made, terminated cables can be installed without disassembling the connectors. The split-frame system enables the quick and simple installation of up to 48 cables in a single frame. Four frame sizes, starting […]
20 AWG multi-conductor flexible control cable with TPE jacket
Multi-conductor flexible control cable from AutomationDirect is now available in 20 AWG unshielded models with 3 to 25 conductors including ground. Existing gauge sizes are available from 18 AWG to 10 AWG with 3 to 41 unshielded or shielded conductors including ground wire. The cable’s outer jacket is a flexible, premium grade Thermoplastic Elastomer (TPE) […]
Quick-disconnect M8 cables and M12 field wireable connectors
Quick-disconnect cables from AutomationDirect have a 3, 4 or 5-socket M8 female connector on one end and 3, 4 or 5 open leads on the other end to provide fast and easy connection between field devices and terminal connections. A “lock in place” nickel plated brass or zinc coupling nut resists high levels of shock […]
VFD/servo cable with signal pair for brake control or sensor feedback
VFD-SC series VFD/servo cable offers four conductors, available in 16 to 10 AWG gauges, plus a foil-shielded signal pair. The VFD-SC series is the same high-quality cable as the standard VFD-C series; the addition of the shielded 16 AWG signal pair allows the cable to be used with motors and drives requiring brake control or […]
Continuous flexing Profinet cable from AutomationDirect
DataMax Extreme industrial Profinet cables are a two-pair shielded construction with 22 AWG twisted pair conductors and 7/30 stranded tinned copper with color coded high-density polyethylene insulation. Shielded constructions include both a tinned copper braid shield and aluminized polyester foil overall shield. The cable’s outer jacket is pressure extruded Thermoplastic Elastomer (TPE) with excellent moisture, […]
