• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Wire and Cable Tips

...
...
  • Basics of Wire and Cable
  • Industry News & Events
  • Blog
  • Markets
    • Automation
    • Construction/Off-Highway
    • Electronics
    • Food/Beverage
    • Medical/Pharmaceutical
    • Military/Aerospace
    • Offshore/Marine
    • Oil/Gas
    • Renewables/Energy Production
    • Robotics
    • Semiconductor
  • Products
    • Data Transmission
    • Networking
    • Power Transmission
  • Suppliers
  • Video
  • DesignFast

Redding Traiger

RJ-45 housing keeps extended connection clean and dry

January 26, 2022 By Redding Traiger Leave a Comment

Platinum Tools announces the launch of the new weatherproof RJ45 coupler housing (p/n 744). Additional features of the new weatherproof RJ45 coupler housing include: IP64 rated – sealed against dust and splashing water; Cat 5e/6/6A compatible with appropriate coupler; Full rubber liner and dual locking latches; Center mounting points to secure to a surface; Now […]

Filed Under: Cable management, Couplers, Electronics Tagged With: platinumtools

Rollable ribbon fiber optic microcable offers increased density

September 8, 2021 By Redding Traiger Leave a Comment

OFS expands its microcable product line with the RollR200 Central Core (CC) Rollable Ribbon Microcable. The RollR200 CC Rollable Ribbon Microcable features 432 optical fibers in a gel-free central core design optimized for microduct installations. This latest-generation cabling solution can help take metro networks to the next level with increased fiber density, enhanced performance, and speed of […]

Filed Under: active optical cables, DW sync, Products Tagged With: ofs

Round cable entries for screwless mounting

September 8, 2021 By Redding Traiger Leave a Comment

The new KES-E-R cable entries allow for quick and secure feeding of cables into control cabinets or machine housings. The plates are simply manually pressed into the machined openings. The inner, elastic sealing lip of the profile seal bulges on the inside of the panel, ensuring secure and vibration-proof hold. In order to feed cables […]

Filed Under: Cable management, Construction/Off-Highway, control cables, DW sync Tagged With: contaclip

MotionFlex control cables for linear and torsional motion

August 2, 2021 By Redding Traiger Leave a Comment

LUTZE Inc is introducing MOTIONFLEX Control cables, an innovative new cabling solution for continuous motion applications in industrial automation. MOTIONFLEX Control cables are specifically designed for versatility and are suitable for linear and torsional motion applications as well as use in cable trays. LUTZE MOTIONFLEX cables are versatile, with construction and approvals for both plant […]

Filed Under: control cables, DW sync, Industrial, Products Tagged With: Lutze

BNC cable assemblies use highly flexible, low-loss RF cables

July 28, 2021 By Redding Traiger Leave a Comment

Amphenol RF is offering a full line of high-performance BNC cable assemblies which utilize highly flexible, low loss Times LMR-UF cables. These 50-ohm assemblies are available in multiple configurations in an extensive range of standard lengths from 12 inches to 30 meters and are suitable for a number of applications including test and measurement and […]

Filed Under: Cable assemblies, Electronics, Industrial, RF cable Tagged With: AmphenolRF

Splittable frames for quick and tool-free cable entriese

July 21, 2021 By Redding Traiger Leave a Comment

icotek offers the tried and tested KEL-SNAP frame now as a new splittable version of KEL-SNAP-S. The patented KEL-SNAP-S frames provide a quick and tool-free assembly for the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry frames from icotek. Switch cabinets can be equipped with the KEL-SNAP frame in advance by the control manufacturer […]

Filed Under: Cable management, DW sync, Electronics, Frames, Products Tagged With: icotek

High-frequency 12G MCX cable assemblies FOR 4K/Ultra-HD

June 21, 2021 By Redding Traiger Leave a Comment

Amphenol RF announces the expansion of our 12G MCX product series to include cable assemblies designed on Belden 4855R. This 75-ohm assembly is available in a right-angle plug to right-angle plug configuration in a wide range of standard lengths from six inches to three meters. 12G MCX cable assemblies are suitable for a number of […]

Filed Under: Cable assemblies, Electronics, Products Tagged With: AmphenolRF

HEAD Quabbin 600-V control cable from AutomationDirect

June 11, 2021 By Redding Traiger Leave a Comment

AutomationDirect has added Quabbin 600V control cable to our extensive selection of cable offerings. These cables are ideal for use in control panels, conduits, and where superior electrical properties are required. The smaller diameter design for this cable reduces cost and the space required inside panels and conduits. This cable is available in shielded and […]

Filed Under: control cables, DW sync, Electronics Tagged With: AutomationDirect

Cord clips ensure safe, long-lasting designs

June 11, 2021 By Redding Traiger Leave a Comment

Interpower announces a new optional cord clip for all of its U.S.A.-made 3×18 AWG cords and the 3×18 VCT-F Japanese cords. The new Interpower Cord Clip is constructed of a glass-reinforced Polypropylene compounded resin for molding consistency and retention. The clips are set at an optimal 4.75 inches behind the plug, and are molded in […]

Filed Under: Cable management, DW sync, Industrial, Medical/Pharmaceutical Tagged With: interpower

CCSI offers wire harness testing for required cleaning specifications

June 3, 2021 By Redding Traiger Leave a Comment

Custom Cable Solutions, Inc. (CCSI) announced the addition of in-house steam and waterjet testing to confirm harnesses’ overall tape binding, overall shield application, and overall outer covering conforms to type b, class 1, 19207-12465333 cleaning specifications.  Mandated to help safeguard troops on the battlefield, the specification verifies assemblies’ compliance with the US Army Land Vehicle […]

Filed Under: automotive, Cable management, DW sync, Military/Aerospace, Products Tagged With: customcablesolutionsinc

  • Go to page 1
  • Go to page 2
  • Go to Next Page »

Primary Sidebar

EE TRAINING CENTER CLASSROOMS

EE Classrooms

RSS Current EDABoard.com discussions

  • Unusual gap shape of ETD59 ferrite core?
  • Vco cadencd
  • WH-LTE-7S1 GSM module and SIM card problem
  • Effect of variable gain amplifier and LNA on the input RF signal's phase
  • Pic 16f877A Hex file

RSS Current Electro-Tech-Online.com Discussions

  • Very logical explanation on low calue C3
  • HV Diodes
  • intro to PI
  • Need help working with or replacing a ferrite tube
  • Help wanted to power an AC120v induction motor ( edited from Brushless motor - thank you @SHORTBUS= )
Subscribe today

Footer

EE World Online Network

  • DesignFast
  • EE World Online
  • EDA Board Forums
  • Electro Tech Online Forums
  • Connector Tips
  • Microcontroller Tips
  • Analog IC Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips
  • 5G Technology World

Wire and Cable Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
Follow us on TwitterAdd us on FacebookFollow us on YouTube Follow us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy