Amphenol RF is pleased to announce the expansion of its ruggedized product portfolio with new IP67 sealed BNC and TNC cable assemblies. These assemblies feature an innovative flexible PVC conduit that is used to wrap the length of the cable to provide an extra layer of protection in rough environments. This unique design makes the […]
DW sync
Cut-to-length Quabbin commercial Ethernet and data cables from AutomationDirect
AutomationDirect has added Quabbin commercial Ethernet and data cables to provide more choices for your wiring/cabling needs. The new 26 and 24 AWG commercial Ethernet cables are available in Cat5e/6/6a/6e types, in shielded and unshielded versions, and they are suitable for applications from 10 Base-T to 1000 Base-T (Gigabit Ethernet). These cables feature a round, […]
Expanded OCT hybrid cables for drag chain use
The automation specialist LÜTZE, Weinstadt, is presenting four new OCT combination supply lines for use in drag chains based on the Beckhoff standard. In addition to the previously available LÜTZE assemblies with a core cross-section of 1.0 mm2, three more are now available with 1.5, 2.5, and 4 mm2 for the types ZK4500 and the […]
Bimed cable entry systems and cable glands from AutomationDirect
AutomationDirect has added BPA series split-frame and BRM series solid-frame cable entry systems and cable glands from Bimed. Cable entry systems provide safe installation into enclosures or electrical equipment, securing cables and providing strain relief while maintaining enclosure sealing requirements. The BPA series cable entry system allows cables to be installed through an enclosure or […]
Why should one worry about voltage drop?
By Frances Richards, Contributor To put it simply, excess voltage drop can reduce the operating efficiency of motors, lights, appliances, and other electrical equipment. If too much voltage is lost while passing through wires, equipment may not function properly, or at all. For certain equipment such as pumps, large motors, or machines that use compressors, […]
BNC right-angle plug cable assemblies simplify connections in small spaces
Amphenol RF is pleased to announce the expansion of our popular BNC cable assembly series with a unique configuration that employs strain relief boots on either end of the cable. This BNC straight to right‐angle plug assembly boasts additional reinforcement to the joints to prevent damage in applications that require frequent mating and unmating. The […]
Multiflex 512 PUR UL/CSA drag chain-rated cable receives NEK 606 approval
Helukabel recently announced that its Multiflex 512-PUR UL/CSA and its shielded variant (Multiflex 512-C-PUR UL/CSA) are now certified according to the internationally recognized Norwegian Electrotechnical Committee (NEK) standard TS 606, which defines the requirements for halogen-free cables that are resistant to drilling mud. This approval is found primarily in applications associated with the oil and […]
Io Audio Technologies zero halogen jacket Cat 6 wire released by New Yorker Electronics
New Yorker Electronics has announced the availability of the Io Audio Technologies 8 Conductor Multi-Pair Cat6 Cable designed for longer maximum cable runs and increased signal integrity. With four twisted pairs of stranded 23 AWG conductors, it’s ideal for structured cabling and transmission of digital/analog signals for data, video and audio applications. The Io Audio […]
Murrelektronik M12 data and power cables, and field-wireable connectors
New Murrelektronik data cables are high-flex shielded Ethernet Cat5e cables offering various connector styles, including D-coded M12 to M12, M12 to RJ45, RJ45 to RJ45, and M12 to pigtail. These cables are flame-retardant and chemical resistant with a tough TPE (thermoplastic elastomer) jacket for typical industrial applications. A selection of RJ45 IDC field-wireable connectors and […]
Multi-cable bushing system with large clamping range for high-density needs
LAPP has introduced its Skintop Multi-M round multi-cable bushing system for applications requiring a high packing density. Up to 30 entry points are available, depending on the Multi-M bushing version, to accept cables, wires, conduits and pneumatics and media conduits. These metric-style units offer a large, 4-mm clamping range per entry point compared to just […]
