• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Wire and Cable Tips

...
...
  • Basics of Wire and Cable
  • Industry News & Events
  • Blog
  • Markets
    • Automation
    • Construction/Off-Highway
    • Electronics
    • Food/Beverage
    • Medical/Pharmaceutical
    • Military/Aerospace
    • Offshore/Marine
    • Oil/Gas
    • Renewables/Energy Production
    • Robotics
    • Semiconductor
  • Products
    • Data Transmission
    • Networking
    • Power Transmission
  • Suppliers
  • Video
  • DesignFast

Category 8.1 cable assemblies for high noise environments

November 6, 2020 By Mary Gannon Leave a Comment

Stewart Connector, a Bel group company, introduces their Category 8.1 cable assemblies (patch cords) that support 25 and 40 Gbps Ethernet transmission speeds over balanced twisted-pair copper cabling. They are designed to meet Category 8.1 performance standards as defined by ISO/IEC 11801-1:2017 and ANSI/TIA-568.2-D.

img-stw-cat8.1-cable-assembly-ca81-020m-01_v3Stewart Connector’s Category 8.1 cable assemblies are designed to run high speeds over copper cabling while featuring industry-standard form factor RJ45 connectors on each end. The enhanced design remains reward compatible with industry-standard RJ45 jacks but enables the highest performance available today. Category 8.1 cable assemblies are a cost-effective solution for data centers looking to upgrade their data transmission speeds without switching over to a more costly fiber optic solution. The Category 8.1 cable assemblies feature aluminum PETP foil around each twisted pair to minimize internal crosstalk. This design feature is ideal for high noise environments including military applications, medical applications, and data center switch-to-server interconnections.

Stewart Connector’s Category 8.1 Cable Assemblies are in stock with Digi-Key, Mouser and Newark.

Stewart Connector
www.belfuse.com

You may also like:

  • Stewart Connector M12 X-code cable assemblies
    M12 X-code cable assemblies support up to 10 Gbps Ethernet…

  • Expanded SealJack cable applied series from Stewart Connectors

Filed Under: Data Transmission, DW sync, EE sync, Products Tagged With: stewartconnector

Reader Interactions

Leave a Reply Cancel reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

EE TRAINING CENTER CLASSROOMS

“ee

“ee

“ee

“ee

“ee

RSS Current EDABoard.com discussions

  • Intellectual property
  • RC Circuits prepration
  • Sine Wave Generation with SPI and TIM interrupt in STM32
  • Can i store data with variable length in a RAM in VHDL ?
  • Upconverting a 20 GHz signal to 28 GHz

RSS Current Electro-Tech-Online.com Discussions

  • Reverse audio in relative real time??
  • Where to buy a Quick 861DW in Canada?
  • VJTAG protocol
  • Multiple UART Hub to USB?
  • What has happened to EEVBLOG videos?

Follow us on Twitter

Tweets by WireCableTips
Subscribe today

Footer

EE World Online Network

  • DesignFast
  • EE World Online
  • EDA Board Forums
  • Electro Tech Online Forums
  • Connector Tips
  • Microcontroller Tips
  • Analog IC Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips
  • 5G Technology World

Wire and Cable Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
Follow us on TwitterAdd us on FacebookFollow us on YouTube Follow us on Instagram

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy