TE Connectivity continues to extend its Sliver line of connectors and cable assemblies for SFF-TA-1002 with new cabled receptacles and cable assemblies that consolidate signal and power into one cost-effective solution. Like previous solutions, this new version complies with the SNIA (Storage Networking Industry Association) Small Form Factor Technology Work Group’s SFF-TA-1002 specification, and is […]
teconnectivity
Easy-to-assemble split banding rings provide grounding or screening protection
TE Connectivity is expanding its range of qualified products in the MIL-SPEC 85049 range with the introduction of its new split banding rings. TE’s split banding rings help provide grounding or screening protection to cable assemblies in aircraft and military vehicles, joining a wide range of other TE products in the AS85049 range. Qualified to […]
Dual-wall heat shrink tubing meets power/battery cable to terminal needs
TE Connectivity (TE), has introduced its BATTU heat shrink tubing, a dual-wall, fire retardant product intended for battery/power cable to terminal applications in industrial and commercial vehicles, construction equipment, generator sets and more. The BATTU tubing products’ polyolefin jacket and thermoplastic inner adhesive wall provide excellent performance in harsh environments. With an approximate 2:1 shrink […]
Raychem CANbus cables offer speeds to 1 Mb/sec for military, aerospace
TE Connectivity (TE), Harrisburg, Pa., has launched its portfolio of Raychem CANbus (Controller Area Network) cables. With variations available that cater to a variety of harsh environments, these high-speed copper cables offer a ruggedized means of transmitting data at speeds up to 1 Mb/s. The high-performance 120Ω twisted pair cables are available in constructions that meet […]
56 Gbps QSFP56 and SFP56 cable assemblies from TE Connectivity
TE Connectivity (TE), Harrisburg, Pa., has once again leveraged its signal integrity expertise to deliver one of the highest-performing 56 Gbps QSFP56 and SFP56 cable assembly portfolios in the market. The new portfolio of products supports aggregate data rates of 100 and 200 Gbps, making them ideal for a range of applications including data center […]
Side exit CROWN CLIP Junior power cable assemblies from TE Connectivity
TE Connectivity has introduced its new side exit CROWN CLIP Junior power cable assemblies, which can deliver 50% space savings and significantly improve design flexibility over traditional bus bar cable assemblies. By using a side exit for the power cables, this solution minimizes the need to bend cables when routing them beyond the center of […]
New Instalite molded boots from TE Connectivity simplify sealed harness installation
TE Connectivity has introduced the next generation of Instalite molded boots with Rayaten shielding for harnessing applications that need EMI shielding. Designed with new flexible EMI shielding materials, Rayaten shielding heat-shrinkable boots are easier to install yet maintain the original Rayaten EMI-shielding and ruggedized design. TE’s next generation Instalite molded boots are both easier to install […]
TE Connectivity launches Cat5e rail cable
TE Connectivity has launched a Category 5e (Cat5e) quad high-speed data cable for railway rolling stock and infrastructure. With its halogen-free flame retardant polymer insulation, the cable complies with EN45545-2, the new European standard covering fire behavior of materials and products in railway rolling stock. This is because its crosslinked outer jacketing provides high resistance […]
TE Connectivity adds Deutsch DMC cable clamps for aerospace applications
TE Connectivity (TE) has recently released its DEUTSCH DMC-MD single module cable clamp. This new accessory is compatible with the existing DMC-MD single module product line. The product is ideal for use where robust wire and cable retention is required without the need for shielding. The DMC-MD single module cable clamp is compact, lightweight and […]
TE Connectivity’s single-wall, flame-retardant heat shrink tubing available from Sager Electronics
Sager Electronics, a North American distributor of interconnect, power and electromechanical components, is now stocking TE Connectivity’s single wall flame retardant (SWFR) heat shrink tubing. This latest addition to the RAYCHEM tubing product line is environmentally friendly and provides excellent electrical insulation and mechanical protection from abrasion. These single wall heat shrink tubing products are rated […]