• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertise
  • Subscribe

Wire and Cable Tips

  • Basics of Wire and Cable
  • Industry News & Events
  • Blog
  • Markets
    • Automation
    • Construction/Off-Highway
    • Electronics
    • Food/Beverage
    • Medical/Pharmaceutical
    • Military/Aerospace
    • Offshore/Marine
    • Oil/Gas
    • Renewables/Energy Production
    • Robotics
    • Semiconductor
  • Products
    • Data Transmission
    • Networking
    • Power Transmission
  • Suppliers
  • Video
  • DesignFast

Liquid-tight cable conduit withstands harsh cleaning processes of food industry

May 19, 2020 By Mary Gannon Leave a Comment

AFC Cable Systems’ newest Liquid-Tuff Liquid Tight flexible conduit is designed specifically for splash zones, making it ideal for food equipment and devices, meat packing, restaurants, food processing, and poultry packing.

AFC-Cable-liquid-tight-conduit--Splash-ZoneThe Splash Zone Liquid Tight Conduit features a moisture-, oil-, and sunlight-resistant polyvinyl chloride (PVC) jacket that inhibits bacteria growth and won’t degrade due to “wash down/splash zones” with bleach agents. This allows food manufacturers to clean and sterilize using bleach without the risk of product degradation. Additionally, the Splash Zone Liquid Tight Conduit is compatible with AFC’s Food Grade Liquid Tight Stainless Steel fitting, which comes complete with polyester elastomer compression seals to prevent ingress of food or bacteria.

The National Sanitation Foundation (NSF) classifies a splash zone as a location where during normal operations direct contact with food products is not expected. The location may be where liquids used in processing or cleaning may splash or spill on the surface causing a risk for dripping or draining onto other surfaces. Wet location listing is not sufficient in these areas and products must be tested to withstand high-pressure hose washdown.

The Splash Zone Liquid Tight Conduit is UL listed and CSA NSF 169 Component compliant, meeting and exceeding standards for material safety, design, construction, and product performance in the food industry. Available in metallic and non-metallic.

AFC Cable Systems
www.afcweb.com

Filed Under: Cable management, DW sync, Food/Beverage, Markets, Products Tagged With: afccable

Reader Interactions

Leave a Reply Cancel reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

EE ENGINEERING TRAINING DAYS

engineering

LEARNING CENTER

Design World Learning Center
“bills

RSS Current EDABoard.com discussions

  • Sendust vs Ferrite for SMPS
  • connector model question
  • Shoot through current in LLC & PSFB
  • sim7090g
  • MIC2309 I-LIM Pin Voltage/Current for Resistor Wattage Selection

RSS Current Electro-Tech-Online.com Discussions

  • More fun with ws2812 this time XC8 and CLC
  • the point I don't understand about signal systems
  • I Wanna build a robot
  • Epson crystal oscillators
  • Impact of Tariffs on PCB Fab
“wire
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for EE professionals.

Footer

Design World Network

  • Design World Online
  • The Robot Report
  • Coupling Tips
  • Motion Control Tips
  • Linear Motion Tips
  • Fastener Engineering
  • Bearing Tips

Wire and Cable Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About Us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy