• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Wire and Cable Tips

...
...
  • Basics of Wire and Cable
  • Industry News & Events
  • Blog
  • Markets
    • Automation
    • Construction/Off-Highway
    • Electronics
    • Food/Beverage
    • Medical/Pharmaceutical
    • Military/Aerospace
    • Offshore/Marine
    • Oil/Gas
    • Renewables/Energy Production
    • Robotics
    • Semiconductor
  • Products
    • Data Transmission
    • Networking
    • Power Transmission
  • Suppliers
  • Video
  • DesignFast

Harness Builder 2017 from Zuken simplifies harness manufacturing

April 26, 2017 By Mary Gannon Leave a Comment

Wire Harness builder Zuken Cirris-CR-1
Cirris Systems CR tester. Harness Builder 2017 for E3.series will see expanded test system coverage, with support for Cirris Systems and Dynalab Test Systems.

Zuken announces the availability of Harness Builder 2017 for E3.series. This powerful, yet easy-to-use tool is based on the proven E3.series toolset from Zuken. Created for harness manufacturers, Harness Builder for E3.series produces a synchronized BOM, harness drawings and wirelists, all in one sheet.

Harness Manufacturers can easily create their harness documentation from drawings and/or a wirelist in a short amount of time. Data sheets can be easily added to documentation. Pricing information, lead time and assembly time can also be calculated automatically.

“Harness Builder 2017 for E3.series responds to customer requests for more test output capability and improved cost analysis,” said Paul Harvell, Director, E3.series Product USA. “Our customers appreciate the simplicity and cost effectiveness of Harness Builder for E3.series, and this release builds on those priorities.”

In the new release, users will see expanded test system coverage with support for Cirris Systems and Dynalab Test Systems. Test system support is a critical need for harness manufacturers and this release provides capabilities to generate test files that are fully compatible with these test systems.

“Our common customers will immediately benefit from this new export capability in a Cirris tester compatible format,” said Kevin Ellsworth, Product Manager, Cirris Test Systems. “They will no long have to input the same data into both systems, saving significant time. By linking Zuken’s Harness Builder for E3.series with Cirris Systems’ harness test products, we can deliver a more comprehensive solution to the harness manufacturing industry.”

Numerous factors can impact harness cost. Harness manufacturers require fast and accurate cost analysis tools and Harness Builder 2017 for E3.series takes into account new cost factors that include inspection time, labor rate, testing time and tooling cost. Incorporating these new cost factors into the design process will improve estimates with minimal additional effort.

Other new features include:

  • Fully integrated unit of measurement definition
  • Full butt splice support of heat shrinks, featuring horizontal shrinkage and cable separation in wire lists.
  • New library parts, including: SOURIAU – 8STA, DEUTSCH – AUTOSPORT, and MIL DRL-38999.
    Harness Builder 2017 for E3.series is available today and is fully compatible with E3.series 2016 and 2017.

Visit Zuken (Booth #1449) at the Electrical Wire Processing Technology Expo, May 10-11, in Milwaukee, to see a full demonstration.

Zuken
www.zuken.com/harness-builder

 

Filed Under: EE sync, Products Tagged With: zuken

Reader Interactions

Leave a Reply Cancel reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

EE TRAINING CENTER CLASSROOMS

“ee

“ee

“ee

“ee

RSS Current EDABoard.com discussions

  • Same geometry but slightly different results
  • 32kW peak power in inrush NTC
  • Oscilations on half-bridge upper switch gate
  • Commodore 1084s monitor with faint vertical lines
  • folded cascode biasing

RSS Current Electro-Tech-Online.com Discussions

  • Tube reverb effect
  • GLCD PIC16F877 lack of character output Issue
  • The popups are getting ridiculous.
  • Engine Temperature using an AD590 on the Oil Pressure Wire to the engine
  • new to Ardunio but trying to compile

Follow us on Twitter

Tweets by WireCableTips
Subscribe today

Footer

EE World Online Network

  • DesignFast
  • EE World Online
  • EDA Board Forums
  • Electro Tech Online Forums
  • Connector Tips
  • Microcontroller Tips
  • Analog IC Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips
  • 5G Technology World

Wire and Cable Tips

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
Follow us on TwitterAdd us on FacebookFollow us on YouTube Follow us on Instagram

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy