icotek now offers cable entry systems especially for use in cleanrooms. The tried and tested cable entry frames KEL-ER and KEL-U with their matching KT grommets, which are designed for cables with connectors, are already available. For cables without plugs, the KEL-DPZ cable entry plates are also available as a cleanroom version. All icotek cable […]
Cable management
Tool-less round cable entries for cables with plugs
Conta-Clip completes its KDS-R modular cable entry program for round metric breakouts from M20 to M63, adding small-diameter versions for cables and conduits with cross-sections from 2 to 35 mm. Cables with and without plugs can thus be quickly and safely fed into control cabinets or housings. The tool-less cable management system consists of a […]
Round cable entries for screwless mounting
The new KES-E-R cable entries allow for quick and secure feeding of cables into control cabinets or machine housings. The plates are simply manually pressed into the machined openings. The inner, elastic sealing lip of the profile seal bulges on the inside of the panel, ensuring secure and vibration-proof hold. In order to feed cables […]
Different ways to secure cable tracks (cable carriers) to machinery
Contributed by Jody Muelaner Cable carriers guide and protect electrical cables, as well as hydraulic or pneumatic hoses. They limit the minimum bend radius and therefore bending stresses, while often also constraining bending to a single plane. They shield and protect cables from wear, prevent entrapment in moving machinery and avoid entanglement. To do this […]
When should you use pre-harnessed (pre-engineered) cable carrier assemblies?
Contributed by Jody Muelaner Cable carriers are hollow chains which guide and protect cables and hoses during motion. They are typically installed on-site with the cables and hoses fitted through manifolds and junction boxes, and fixing plates, brackets and guide or support structures installed. Although it can make sense to carry out this work in-situ, […]
Is an open or closed cable carrier better for a given application?
Contributed by Jody Muelaner Open cable carriers have an open chain-link structure with cross bars that contain cables and hoses. Enclosed cable carriers form a complete tube; this can be achieved using a chain-link structure with sliding covers, or as a homogeneous fully sealed corrugated tube, such as a flexible conduit. All cable carriers prevent […]
Splittable frames for quick and tool-free cable entriese
icotek offers the tried and tested KEL-SNAP frame now as a new splittable version of KEL-SNAP-S. The patented KEL-SNAP-S frames provide a quick and tool-free assembly for the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry frames from icotek. Switch cabinets can be equipped with the KEL-SNAP frame in advance by the control manufacturer […]
All about multi-flex cable carriers used on robotic arms
Contributed by Jody Muelaner Good cable management is vital to the accurate and reliable operation of an industrial robot. Cables that catch and snag will affect the accuracy of a robot. Over time they will result in unplanned maintenance and excessive downtime. Robotic cell integrators have identified cable issues as the most significant cause of […]
How do you specify metal cable carriers?
Contributed by Jody Muelaner Cable carriers are essentially hollow chains that enclose electrical cables, as well as hydraulic or pneumatic hoses. They guide and protect the enclosed cables during motion, preventing wear and damage. An important function of cable carriers is to constrain bending to a single plane and to limit the minimum bend radius. […]
How do you specify plastic cable carriers?
Contributed by Jody Muelaner Plastic cable carriers are fitted to machines to protect and guide cables and hoses. Cable carriers are constructed as a chain of rigid plastic sections. These form an articulated rectangular box section through which cables and hoses are inserted. Enclosing the cables and hoses prevents some forms of damage. The articulated […]